How Much Does a Dock Cost at Lake of the Ozarks?
National cost guides put the average dock at about $15,000, floating docks at $15 to $40 per square foot, covered docks at $19,500 to $39,700 and boat lifts at $2,000 to $20,000. Ameren adds a $550 permit for a new dock or modification. Large Lake of the Ozarks steel docks often cost more. Call (573) 410-4467 for a quote.
No two docks at Lake of the Ozarks are alike, so no honest site can give you one price. What we can give you is the range national cost guides publish, the fees Ameren charges, and the factors that push a quote up or down. Call (573) 410-4467 for a written quote from an independent certified builder.
New docks
| Item | National-guide range |
|---|---|
| Average dock (all types) | About $15,000; typical $7,000 to $25,000 |
| Floating dock | $15 to $40 per square foot |
| Pipe or piling dock | $20 to $40 per square foot |
| Crib dock | $30 to $50 per square foot |
| Covered boat dock | About $19,500 to $39,700 |
| Boat lift | $2,000 to $20,000 (average about $8,000) |
Large steel docks with multiple slips, roofs, sundecks and lifts, common on the main channel, run well above these averages.
Repairs
| Repair | National-guide range |
|---|---|
| Typical repair job | $889 to $5,663 (average about $3,201) |
| Float replacement | $150 to $200 each |
| Decking | $4 to $300 per square foot |
| Roof repair | $150 to $1,000 |
| Frame repairs | $150 to $500 |
Ameren permit fees
| Permit | Fee |
|---|---|
| New dock or modification | $550 |
| Annual fee, docks over 3,000 sq ft | $0.06 per sq ft of water space |
| Bank stabilization (seawall, riprap) | $300 first 100 ft, plus $1 per foot over |
| Breakwater | $1,000 |
| Permit transfer | $100 |
| Permit extension | $50 |
| Building without a permit | $2,000 penalty |
Docks with power also pay a fire district electrical permit fee set by the local district.
What drives a dock quote
- Size and slips. Every slip, lift and walkway adds frame, foam and decking.
- Roof and sundeck. Roofs need heavier frames and more flotation; sundecks add stairs, rails and load.
- Materials. Composite and aluminum cost more than treated wood but need less upkeep.
- Exposure. Main-channel docks need heavier anchoring and sometimes breakwaters.
- Electrical. Lifts, lights and outlets need wiring to Ameren's checklist and an inspection.
- Season. Spring is the rush; fall and winter scheduling can be easier.
Comparing quotes
- Confirm each builder is on Ameren's Certified Dock Builder list.
- Compare the same dock: slip sizes, lift capacities, roof style, decking and flotation.
- Check who pays and files the permits.
- Ask about warranties on the frame, foam and decking.
See our new dock and dock repair pages for more.
Call and we will connect you with an independent local provider.
CALL NOW: (573) 410-4467