Lake of the Ozarks Dock ProsCALL NOW: (573) 410-4467

Dock Repair and Re-Foaming at Lake of the Ozarks

Most Lake of the Ozarks dock repairs fix sagging flotation, cracked stiff arms, loose cables, worn decking or storm damage. Re-foaming must be done by an Ameren Certified Dock Builder or the owner, with proof of proper foam disposal. National guides put typical repairs at $889 to $5,663. Call (573) 410-4467 for a repair crew.

Dock sagging or damaged? Call to reach a certified dock repair crew.

Call and we will connect you with an independent local provider.

CALL NOW: (573) 410-4467

Lake of the Ozarks docks work hard. Wake from big cruisers rolls in all summer, winter brings ice and lower water, and storms push wind and debris into coves. Sooner or later every dock needs work: a corner that sits low, a stiff arm that cracked, decking that is soft underfoot or a roof panel that blew loose. Call (573) 410-4467 to reach an independent dock repair crew that works the lake. Lake of the Ozarks Dock Pros is an independent referral service. We do not build docks; we connect you with an independent Ameren Missouri Certified Dock Builder who quotes, permits and builds the job.

Signs your dock needs repair

Re-foaming and flotation

Flotation is what keeps a floating dock level. Old open foam soaks up water, breaks apart and loses lift, so many older docks need new encapsulated flotation. Ameren treats re-foaming as regulated work: it must be done by an Ameren Certified Dock Builder or the owner, and certified builders must provide an affidavit or proof that waste foam was disposed of properly. That rule exists to keep foam out of the lake.

Repairs that need an Ameren permit

Ameren says any modification to an existing dock requires a permit fee, and a modification is billed at $550, the same as a new dock. Adding a slip, extending the dock, raising a roof or adding a sundeck is a modification. Like-for-like repairs such as replacing a broken board may not be, so ask your builder to confirm with Ameren before work starts.

Who can do the work

Ameren Missouri, which owns the lake and the shoreline below the project boundary, says every dock, breakwater, addition, modification and re-foaming job must be done by an Ameren Certified Dock Builder or by the property owner. To stay certified, a builder must carry at least $1,000,000 of commercial liability insurance with Ameren named as an additional insured, carry workers compensation and employer liability coverage of at least $500,000, prove that old foam and materials were disposed of properly, and pass an initial inspection plus random follow-up inspections. Ask any builder for their certification and certificate of insurance before you sign.

Typical dock repair costs

These are national cost-guide figures. Lake of the Ozarks steel docks are often larger than average, so get a written quote.

RepairNational-guide range
Typical repair job$889 to $5,663 (average about $3,201)
Float replacement$150 to $200 per float
Float repair$100 to $150 each
Decking repair or replacement$4 to $300 per square foot depending on material
Roof repair$150 to $1,000
Frame repairs$150 to $500

What drives the price

How long it takes

Small repairs such as decking, cables or a stiff arm often take a day or two once scheduled. A full re-foam or frame repair on a big dock can take a week or more, plus any permit time. Ameren gives one year from the permit date to finish dock work.

Winter and low water

Ameren reminds dock owners each winter to get docks ready as lake levels drop. Lower water can leave anchors tight, ramps steep and shallow docks sitting on the bottom. A fall check of cables, stiff arms and ramp hinges heads off the worst problems.

Electrical problems come first

If a breaker keeps tripping or anyone feels a shock in the water, keep people out of the water and have a licensed electrician check the dock before anything else. Ameren's dock wiring checklist requires GFCI protection on all receptacles, a disconnect at the seawall and bonding jumpers across every pivot point. See our permit and electrical guide.

Questions to ask before you hire

Call (573) 410-4467 to get connected.

Dock sagging or damaged? Call to reach a certified dock repair crew.

Call and we will connect you with an independent local provider.

CALL NOW: (573) 410-4467

Frequently asked questions

Does dock re-foaming need a certified builder?

Yes. Ameren says re-foaming, like new docks and modifications, must be done by an Ameren Certified Dock Builder or the property owner, with proof of proper foam disposal.

Do dock repairs need an Ameren permit?

Any modification to an existing dock requires a permit and a $550 fee. Like-for-like repairs may not, so ask the builder to confirm with Ameren first.

How much does dock repair cost?

National cost guides put typical dock repairs at $889 to $5,663, averaging about $3,201. Large steel docks and full re-foams can cost more.

Areas we serve

We connect callers across Lake of the Ozarks, Missouri (Camden, Miller, Morgan and Benton counties), including:

Local pages: Osage Beach, Lake Ozark, Camdenton.

Related services

Dock sagging or damaged? Call to reach a certified dock repair crew.

Call and we will connect you with an independent local provider.

CALL NOW: (573) 410-4467
TAP TO CALL (573) 410-4467